新型微填充柱－毛细管柱二维色谱系统过程的动力学研究

从色谱动力学角度对新型微填充柱－毛细管柱二维色谱系统过程中双柱条件与流出曲线及柱效之间的依赖关系加以系统研究。结果表明：由于双柱条件之间存在关联，双柱系统流出曲线特征与单柱系统存在一定的差异，流出曲线一阶矩和二、三阶中心矩以及双柱系统的柱效皆由预柱和主柱条件综合确定。     

微视频技术在基础化学实验教学中的实践应用

以高校基础化学实验"从海带中提取碘""三草酸合铁（Ⅲ）酸钾的制备"为例，分别探讨了微视频技术在化学基本操作实验和综合设计型实验中的具体应用；此外，举例说明利用Flash软件制作的虚拟微视频可以在仪器分析实验中清晰地再现仪器真实操作中的每一个步骤，弥补了学生在实验前无法实际操作仪器的不足。实践证明，微视频技术的应用，丰富了基础化学实验教学模式，增强了学生自主学习的能力和动手能力，提高了实验成功率和实验教学效果。     

Acid-base properties of xanthosine 5'-monophosphate (XMP) and of some related nucleobase derivatives in aqueous solution: micro acidity constant evaluations of the (N1)H versus the (N3)H deprotonation ambiguity

The first acidity constant of fully protonated xanthosine 5'-monophosphate, that is, of H3(XMP)+, was estimated by means of a micro acidity constant scheme and the following three deprotonations of the H2(XMP)+/- (pKa=0.97), H(XMP)- (5.30), and XMP2- (6.45) species were determined by potentiometric pH titrations; further deprotonation of (XMP-H)3- is possible only with pKa>12. The most important results are that the xanthine residue is deprotonated before the P(O)2(OH)- group loses its final proton; that is, twofold negatively charged XMP carries one negative charge in the pyrimidine ring and one at the phosphate group. Micro acidity constant evaluations reveal that this latter mentioned species occurs with a formation degree of 88 %, whereas its tautomer with a neutral xanthine moiety and a PO3(2-) group is formed only to 12 %; this distinguishes XMP from its related nucleoside 5'-monophosphates, like guanosine 5'-monophosphate. At the physiological pH of about 7.5 mainly (XMP-H)3- exists. The question, which of the purine sites, (N1)H or (N3)H, is deprotonated in this species cannot be answered unequivocally, though it appears that the (N3)H site is more acidic. By application of several methylated xanthine species intrinsic micro acidity constants are calculated and it is shown that, for example, for 7-methylxanthine the N1-deprotonated tautomer occurs with a formation degree of about 5 %; a small but significant amount that, as is discussed, may possibly be enhanced by metal ion coordination to N7, which is known to occur preferably to this site.     

Synthesis of spherical microcapsules by photopolymerization in aerosols

 The preparation of polymer microcapsules of well defined size in the range of 10–50 μm with different shell thickness to core diameter ratios is described. An aerosol of monodisperse droplets of a homogeneous ternary liquid system which contained a hydrophobic component and a hydrophilic component dissolved in a high-volatile mutual solvent, was produced by dispersing with a vibrating-orifice aerosol generator. After the evaporation of the solvent in a nitrogen atmosphere the particles demix and form a two-phase droplet of core-shell type. These droplets were illuminated with UV light and polymerized to highly monodisperse microcapsules with a solid polymer shell and a liquid core. The properties of the resulting particles (size, size distribution, shell thickness, shape and surface characteristics) were investigated by scanning electron microscopy, Raman spectroscopy on single optically levitated particles, and confocal Raman micro spectroscopy. The microcapsules were highly monodisperse and have spherical shape. Received: 24 July 1996 Accepted: 29 August 1996     

Microrobotics and MEMS-based fabrication techniques for scaffold-based tissue engineering

Scaffold based tissue engineering strategies use cells, biomolecules and a scaffold to promote the repair and regeneration of tissues. Although scaffold-based tissue engineering approaches are being actively developed, most are still experimental, and it is not yet clear what defines an ideal scaffold/cell construct. Solid free form fabrication (SFF) techniques can precisely control matrix architecture (size, shape, interconnectivity, branching, geometry and orientation). The SFF methods enable the fabrication of scaffolds with various designs and material compositions, thus providing a control of mechanical properties, biological effects and degradation kinetics. This paper reviews the application of micro-robotics and MEMS-based fabrication techniques for scaffold design and fabrication. It also presents a novel robotic technique to fabricate scaffold/cell constructs for tissue engineering by the assembly of microscopic building blocks.     

Determination of the second step microstructure for superhydrophobic surfaces

A selection of suitable microstructures is critical to fabrication and properties of superhydrophobic surfaces (SHS). In this study, we introduce a three‐dimensional droplet model to thermodynamically analyze the superhydrophobic properties for the purpose of determining the second step of a two‐step microstructure suitable for the SHS based on the common models within the reach of the existing macro‐machining technology. It is found that a sinusoidal microstructure is the most suitable, followed by a cone frustum and a prism in the composite wetting state, as well as the transition from hydrophilic to hydrophobic depends basically on the solid fraction rather than non‐determinative surface microscopic topography. The predictions of the model are found in quite good agreement with the experimental observations. This study will facilitate fabrication of the SHS on how to select the suitable morphology. Copyright © 2012 John Wiley & Sons, Ltd.     

Properties of cat-eye modulating retro-reflector and its application with piezoelectric transducer

Piezoelectric cat-eye modulating retro-reflector (MRR) is the core component of an acousto-optic retro-identification system. The influence of the optical parameters (link distance l, lens focal length f and the detector diameter r) to the cat-eye effect was analyzed theoretically and experimentally. A piezoelectric cat-eye retro-identification (PCERI) system was built, and an information transmission ratio of 2 kHz was achieved which can satisfy an access control system.     

Structural transformation from shish‐kebab crystals to micro‐fibrils through hot stretching process of gel‐spun ultra‐high molecular weight polyethylene fibers with high concentration solution

Structural evolution of gel‐spun ultra‐high molecular weight polyethylene fibers with high concentration solution via hot stretching process was investigated by in situ small‐angle X‐ray scattering, in situ wide‐angle X‐ray diffraction measurements, scanning electron microscopy, and differential scanning calorimetry. With the increase of stretching strain, the long period continuously increases at relative lower stretching temperature, while it first increases and then decreases rapidly at relative higher stretching temperature. The kebab thickness almost keeps constant during the whole hot‐stretching process and the kebab diameter continually decreases for all stretching temperatures. Moreover, the length of shish decreases slightly and the shish quantity increases although there is almost no change in the diameter of shish crystals during the hot stretching process. The degree of crystal orientation at different temperatures is as high as above 0.9 during the whole stretching process. These results indicate that the shish‐kebab crystals in ultra‐high molecular weight polyethylene fibers can transform continuously into the micro‐fibril structure composed mostly of shish crystals through the hot stretching process. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018 , 56, 225–238     

Micro‐/Nanostructured Multicomponent Molecular Materials: Design,Assembly, and Functionality

Molecule‐based micro‐/nanomaterials have attracted considerable attention because their properties can vary greatly from the corresponding macro‐sized bulk systems. Recently, the construction of multicomponent molecular solids based on crystal engineering principles has emerged as a promising alternative way to develop micro‐/nanomaterials. Unlike single‐component materials, the resulting multicomponent systems offer the advantages of tunable composition, and adjustable molecular arrangement, and intermolecular interactions within their solid states. The study of these materials also supplies insight into how the crystal structure, molecular components, and micro‐/nanoscale effects can influence the performance of molecular materials. In this review, we describe recent advances and current directions in the assembly and applications of crystalline multicomponent micro‐/nanostructures. Firstly, the design strategies for multicomponent systems based on molecular recognition and crystal engineering principles are introduced. Attention is then focused on the methods of fabrication of low‐dimensional multicomponent micro‐/nanostructures. Their new applications are also outlined. Finally, we briefly discuss perspectives for the further development of these molecular crystalline micro‐/nanomaterials.     

High efficiency of Mn–Ce‐modified TiO2 catalysts for the low‐temperature oxidation of Hg0 under a reducing atmosphere

Manganese‐ and cerium oxide‐modified titania catalysts were prepared by the deposition precipitation for the removal of elemental mercury (Hg⁰) from simulated yellow phosphorus off‐gas at low temperature. In addition, these catalysts were characterized by X‐ray diffraction, Brunauer–Emmett–Teller measurements, X‐ray photoelectron spectroscopy and field‐emission scanning electron microscope to determine the surface morphology of the obtained compounds and explore their formation mechanism. The results revealed that a Mn–Ce loading and reaction temperature of 10% and 150 °C, respectively, as well as a Mn/Ce molar ratio of 2:1, led to an optimal efficiency for the oxidation of elemental mercury. Furthermore, the effects of flue gas components were investigated. The presence of O₂ clearly promoted the oxidation of Hg⁰. A CO atmosphere did not affect the Hg⁰ oxidation, when compared with N₂, whereas the presence of H₂S and water vapor inhibited the oxidation process. Furthermore, the X‐ray photoelectron spectroscopy spectra of Hg 4f revealed that the elemental mercury adsorbed by the catalyst is present as HgO. Finally, the Hg⁰ catalytic oxidation mechanism was discussed on the basis of the experimental results and characterization analysis.